HYF

Particle Size Separation in Easy Terms For You

by:HYF     2020-06-25
The illustration shows a part of the important features of an Endecotts sieve and provides a good idea of things to look for whenever you specify or re-order.The wirecloth is checked at every stage of manufacture either by optical projection or highly sophisticated computer scanning techniques. Last inspection is a precision measurement of apertures and sieve frame dimensions. As long as we are satisfied it meets our exacting standards do we give it an Endecotts 'Certificate of Conformity'. Endecotts woven wire mesh sieves are the most widely used test sieves for every type of laboratory sampling and particle size analysis. They produced with only the best materials and are available in diameter sizes of 38,100, 150, 200, 250, 300, 315, 350 400, and 450 mm probably 3, 8, 12 or 18 ins. They can be supplied with aperture sizes ranging from 125 mm down to 20 microns in full or half height versions. Woven wire mesh sieves are available in frame materials of either brass or stainless steel. Perforated Plate Sieves Endecotts manufacture a lots of perforated plate sieves for the many industries that require them. These are available across sizes of 200, 300, 315, 350, 400 and 450 mm.Aperture sizes range from 125 mm to 4 mm in square hole and 125 mm to 1 mm in round spot.Perforated plate sieves can be supplied in frame materials of brass or metal and usually are manufactured towards the highest engineering standards to ensure quality and accuracy. Woven wire sieves and perforated plate sieves are in order to every national and international standard. Many other materials and sizes can be produced to . Used to ascertain the flakiness index of aggregates. Endecotts grid sieves are manufactured to fully conform towards requirements of EN 933-3:1997. The 300 x 300 mm sieves are made entirely of stainless steel and are strong, durable and anti-corrosive. The Grid sieve could be supplied to be a single item or like a set of 13 sieves. A receiving pan furthermore available on request.The low cost M100 is a superb small laboratory shaker designed for 100 mm and 3 inch diameter sieves. The robust, lightweight and delivers the user with complete remedy for amplitude and vibration time. Common with the Endecotts shakers the M100 imparts the optimum vibration movement to your sieves be sure rapid and accurate improvement.Fitted with an electromagnetic drive - the shaker isn't only maintenance free but is without a rotating parts to break. Another advantage of this type of drive is 'quiet operation'.Simply load the sieve stack, clamp into place. Set the 0 to 60 minute timer or select 'I' for continuous sieving. Set the amplitude setting to the optimum level for the sample under test. The M100 will accommodate up to a few 100 mm, 3 or 4 inches diameter sieves plus a lid and receiver. The Minor M200 has been designed and manufactured to mix low cost with seniors a developed and engineered shaker incorporating many features usually found only on larger much more costly models. It is great for the laboratory or plant since moment has come compact and genuinely portable (weighing only 17kg). There isn't any rotating parts in the Minor M200 consequently is usually quiet operating and easy to maintain. The sieve stack is held firmly into position between the venue and clamp plates by poly fibre straps, these allow full unit to get packed away in space less than 200 mm high. Simply set the 0 to 60 minute timer for a timed operation or select 'I' for continuous sieving.The vibrating action imparts a precise movement to your sieve stack ensuring efficient sieving and ideal repeatability.the EFL has been specially made to operate with heavy samples without the loss of performance. The time equipped with a dynamic power source that ensures the right vibration is imparted to your sample for fast, accurate and reproducible tests.
Custom message
Chat Online
Chat Online
Chat Online inputting...