Description of Flotation Machine
It is deployed in classifying in non-ferrous and ferrous metal mineral. SF will be the mechanical agitation type, and it can draw the inspiration and the pulp. Compared to flotation cell, its spirit is big, and the power loss low, and the impeller lap wears lightly. The impeller diameter is small, the rotational speed low, consuming electricity few, also advantageous for the automatic control.
Flotation Machine Working Principle
When flotation cell works, slurry is inhaled from backside of the trough to the space between impellers. Meanwhile, the low-pressure air send by fan is sent for this area through atmosphere distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to method trough. When the froth rises for the stable level, big event enrichment processing, froth overflows to the froth trough contrary to the overflow weir. Another part of ore slurry flows decrease part of impeller for the remiss with air. The remained slurry flows to the next trough until becomes residue.
(1)The capacity of air suction is large, the power consumption is budget friendly.
(2)Every tend has three functions of air suction, slurry suction and flotation simultaneously being unique in flotation return circuit without interest on any supplement and equipment, the circuit change is convenient for horizontal shop.
(3)The slurry cycle is rational; the settlement of coarse sand can be reduced into full play.
(4)The regulation is best to equip auto and electro-controlling arrangements for slutty stage.
General Introduction of Magnetic Separator
They are devices that are primarily used to eliminate tramp iron from ores and for removing contaminating materials that can damage equipment. There are pretty much two kinds of magnetic separators given by our factory. May possibly wet magnetic separator and magnetic drum separator. In concentration processes, the Magnetic Separator is very popular to sort assorted types of metals. Similarly, in case of weak magnetic minerals such as hematite, limonite and garnet, they can be separated from the non- magnetic substances by the use of high-intensity separators.
1.China Separator was designed through magnetic field simulation by computer, having enough magnetic field and big magnetic attraction area to attract Ferro scraps from are usually.
2.Compact structure, low noise, easy maintenance, stable magnetic field around the ferrite or rare earth magnets, energy saving without excitation system.
3.Workable in the harsh working environment for very long time based on the specially sealed bearing seat and the belt with automatic corrective function. For very sharp ferromagnetic tramps, special belt armored by metal plate prevails to protect the belt from eliminating.
4.There is common and explosion-proof drive motor for customer choice.5.
5.Because of high power rare earth magnets, HX serial separators have high magnetic field gradient, stable magnetic field, super attraction that can remove big Ferro blocks and small Ferro scraps from the materials, even remove the ferromagnetic scraps buried in the thick material layers significantly.
Short magnetic circuit; Little magnetic flux leakage; High magnetic intensity; Low energy consumption; Fine beneficiating results; Simple structure and for you to maintainence
wet magnetic separator:http://www.crusher-machine.com/25.html