Hot Rolled Stainless Steel Welded Pipe

————————————————————————————————————————————————————————————————————————————————————————————————————————————

▮

Standard: JIS, AISI, ASTM, DIN, EN

▮

Steel Grade: 300 Series, Grade 304 310

▮

Application: Machinery

▮

Certification: ISO

▮

Welding Line Type: Seamless

▮

End protector: Customed

▮

Length: 6-12m

▮

Product: High Precision Tube

▮

Technology: Hot Rolled Cold Rolled

▮

Packing: Packing

▮

Main Products: Hot rolled

▮

Usage: Decoration industrial

PRODUCT PARAMETERS

Welded/Seamless Stainless steel Pipe
Standard	ASTM, AISI, ASME, SUS, JIS, EN, DIN, BS, GB. etc
Grade	304/304L, 316LL, 321, 317L, 310s/201/310s/2205
	Dulex 2205, 2507
	Monel 400, Inconel 600
	Incoloy 800/800H
Outer Diameter	6 ~ 610mm (1/4"-24")
Wall Thickness	0.5 ~ 45mm (0.0196"-1.780")
Length	6m ~ 12m as customer's requirement
Surface	Solution Pickling
Tolerance	a) Outer Diameter: +/- 0.2mm
	b) Thickness: +/- 0.02mm
	c) Length: +/- 5mm
Application	Decoration
	Petrochemical industrial control
	Bio-pharmaceutical industry
	Food and beverage industry
	Aerospace industry
	Boiler heat exchange tube
	Automation and industrial fluid using pipe etc

PRODUCT DESCRIPTION

Cold rolled stainless steel plate is produced by cold rolling process of stainless steel plate, thickness of not more than 3mm for sheet, thickness of more than 3mm for thick plate.The main USES of cold-rolled plate: mainly used in automobile manufacturing, electrical products and so on.

Characteristics of cold-rolled plate: because it has not been annealed, its hardness is very high (HRB is greater than 90), and its machining performance is very poor, so it can only conduct simple directional bending less than 90 ° (perpendicular to the coiling direction).

Raw material of cold-rolled plate: cold-rolled plate is a product made by rolling hot rolled coil at room temperature and under recrystallization temperature.

SUPPLY ANY TYPE OF STAINLESS STEEL PRODUCTS, BEST QUALITY-CONTROL, LONG-TERM BUSINESS

PRODUCTION PROCESS

Stainless steel plate process: if be annealed stainless steel should be used chemical NG - 9-1 to black, have the oil with NZ - B in addition to the first oil to oil - water - electrochemical finishing polish king (directly using the fluid as working fluid, temperature of 60 ~ 80 ℃, hang anode workpiece, current Da: 20 to 15 a/dm2, cathode - to lead antimony alloy antimony (including 8%) time: 1 ~ 10 minutes, cast light) - water - 5 ~ 8% hydrochloric acid membrane back (at room temperature: 1 ~ 3 seconds) to water washing, blow dry.

TECHNICAL SPECIFICATION

304	C %	Si %	Mn %	P %	S %	Ni %	Cr %	Mo %	N %
ASTM	0.08	0.75	2.00	0.045	0.03	8.0 - 10.5	18.0 - 20.0	-	0.10
DIN/EN	0,07	1,00	2,00	0,045	0,015	8,0 - 10,5	17,5 - 19,5	-	0,10
JIS	0.08	1.00	2.00	0.045	0.03	8.0 - 10.5	18.0 - 20.0	-	-
GB	0.08	1.00	2.00	0.045	0.03	8.0 - 10.0	18.0 - 20. 0	-	-

ACCESSORY PARTS

Flange, also known as Flange or Flange. A flange is a part that connects the pipe to the pipe and is connected to the end of the pipe. There are holes in the flange and bolts make the two flanges tightly connected. Gasket between flanges. Flanges are threaded connection flanges and welded flanges.