Grade: 300 Series, 200 series, 400 series
Standard: JIS, AISI, ASTM, GB, DIN, EN
Length: 1000~8000mm, Custom Length
Application: Engineering; Equipment
Surface treatment: Mill finish,anodized,powder coated
Color: Customized Color
Material: Alloy 6063/6061/6005/6060/6463/6082 T5/T6
Size: Customized Length
Technique: Hot Rolled
Package: Standard Seaworthy Package--wooden Pallet
Hot rolled stainless steel sheet
201, 202, 304, 304L, 309
TISCO, BAOSTEEL, POSCO, JISCO, LISCO etc.
0.3mm-6mm(cold rolled),3mm-100mm(hot rolled)
1000mm,1219mm(4feet),1250mm,1500mm,1524mm(5feet),1800mm,2000mm or as your requirements.
2000mm, 2440mm(8feet), 2500mm, 3000mm, 3048mm(10feet), 5800mm, 6000mm or as your requirements.
Common: 2B, 2D, HL(Hairline), BA(Bright annealed), No.4.
3 days after confirming the order
Water proof paper+metal pallet+Angle bar protection+steel belt or as requirements
Architectural decoration, luxury doors, elevators decorating, metal tank shell, ship building,decorated inside the train, as well as outdoor works, advertising nameplate, the ceiling and cabinets, aisle panels, screen, the tunnel project, hotels, guest houses, entertainment place, kitchen equipment, light industrial and so on.
hot rolled stainless steel plate is produced by hot rolling process of stainless steel plate, thickness of not more than 3mm for sheet, thickness of more than 3mm for thick plate.The main USES of cold-rolled plate: mainly used in automobile manufacturing, electrical products and so on.
Characteristics of hot-rolled plate
Because it has not been annealed, its hardness is very high (HRB is greater than 90), and its machining performance is very poor, so it can only conduct simple directional bending less than 90 ° (perpendicular to the coiling direction).
Raw material of hot-rolled plate
Hot-rolled plate is a product made by rolling hot rolled coil at room temperature and under recrystallization temperature.
Stainless steel plate process: if be annealed stainless steel should be used chemical NG - 9-1 to black, have the oil with NZ - B in addition to the first oil to oil - water - electrochemical finishing polish king (directly using the fluid as working fluid, temperature of 60 ~ 80 ℃, hang anode workpiece, current Da: 20 to 15 a/dm2, cathode - to lead antimony alloy antimony (including 8%) time: 1 ~ 10 minutes, cast light) - water - 5 ~ 8% hydrochloric acid membrane back (at room temperature: 1 ~ 3 seconds) to water washing, blow dry.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist