Characteristic And Maintenance of Vibrating Screen

by:HYF     2020-07-17
As we everyone knows, in the using progress of screening machine, it's necessary to maintain this equipment. Then what's its maintenance, how will it have a durability? Here, engineers of Hongxing Machinery will an individual some tips for its maintenance. 1. When disassemble the surface of precision parts, in order to be especially careful guard these parts of surface to avoid damage. 2. Open the equipment parts of surface which would be rust and intend to be stored apart from machine more compared to a few hours, end up being well protected and coated with oil, or coated with rust inhibitor. 3. Disassemble gear parts with bearing surface and machined surface, should lay a wooden plate on the ground to prevent a primary contact between precision work surfaces and ground. 4. Before equipping parts on screening machine should be cleaning and oiling in advance. 5. Percussion of hammer direct to parts is prohibited when loading and unloading process, there must be copper stick or other pad between hammer and parts. It must be special attention to your damage and cracks of casting parts because of drums. Sometimes the cracks of these parts would exist after operation heating only. 6. When the bearing is damaged, it is much better to replace two of bearing at the same time. If due to limited condition, aren't able to replace both a couple of bearing, should disassemble all the bearing, clean them and then do the application. 7. When use a new vibrating screen mesh, must result in the connection between screen mesh and screen box angle steel or groove steel firmed, and tighten them. Main characteristics for this equipment: 1. The side plate and the beam of ZSR hot ore vibrating screen are associated with high quality and also heat -resisting stainless steel and they are connected firmly by ring groove rivet. That's all for that high temperature associated with materials under screening. 2. Special gear is designed to fix the screen plate in order come up with it work normally under high weather. It is characteristic by the firm structure, the stable performance, and may provide a noise and higher efficiency The above always be suggestions to the upkeep of vibrating screen for mining use. If you have other questions about the mining screens or crushing machines, such as jaw crusher, high frequency screen or powder-grinding machines and ore dressing machines, etc, please don't hesitate to contact us, you will get satisfied answers. Vibratory feeder:http://www.hxjqchina.com/product-list_14.html Classifiers:http://www.hxjq-crusher.com/22.html
Custom message
Chat Online
Chat Online
Chat Online inputting...